There are three table stations in a well-designed sewing area, a table for cutting and a table for pressing. Each station has its own comfort specifications for the sewing employee who works in the field. Sometimes, tables are used to cut and press when an individual stands and wants to be larger. The tables are used to stitch the person sitting so that the foot pedal is worked and both hands are used simultaneously.
Tables
It is important to consider the primary person when designing the height of a sewing table. Most heights of the sewing table are 5 feet and 3 inches tall for a male. However the average is 4-foot-6 to 5-foot-3″ and you may be more than 5-foot-3 inch tall, of course. For the average 5 foot 3-inch male, the proposed table height is around 28 inches. This is because the height of the table depends rather than on the height of the person.
Machines
For more than 100 years, domestic sewing machines have been sold. Most of these computers were self-casing handheld machines. Depending on the style, these devices differ in height. Few of the machines have hit the sewing surface by one inch from the bench. This means that the real sewing machine’s surface or table is centered on the height of the sewing table up to the foot of the machine, which may vary up to 4 cm. For a 5-foot 3-inch-large male, the average sewing table height is 28 cm lower than the machine-to-table meter.
chairs
Includes the same questions as table height when fitting the sewing machine table into the required chair. At the very least, the chair must swivel and tuck under the top of the table, so that the underside of the table is touched by no part of the leg. When more than one person uses the sewing table and engine and has a height gap, decide the best height for the person and pick a chair which can be upgraded to the person shorter.
Cutting and ironing
Cutting and ironing tables provide tables for sewing. In most situations, the sewing individual stands up for these two tasks, so the table heights are higher for each activity than for the actual sewing. The surface height should be between 24 and 28″ if an ironing board is used while the sewing individual sits. The surface should be between 36 and 40 cm, while ironing and cutting tables are being used while standing.
